Ⅳ. 전력공학의 공식
1. 물의 위치수두
1) 정의
수두를 헤드라고도 한다. 단위는 길이의 차원이나 위치 에너지를 구하는 기본이 되는 값이며, h는 수면의 높이이다. 즉, 단위 무게 [kg]당의 물이 갖는 에너지를 말한다.
2) 공식
위치 수두 = H [m]
2. 물의 압력수두
1) 정의
수관 속의 유수의 압력은 유
marketing milk, using intact, or removing grease. skim powdered milk is more better than powdered milk.
• removing grease method
Don't use centrifugal, storage the milk in freezer one day. Then put away the yellow grease on the top.
• sterilization
marketing milk is unnecessary, but powdered milk heating 80℃
• cooling
cooling use freezer or cool water until 40 ml
Representative Foods which need thorough management control about temperature of all making process and product delivery vehicles
Motive of the research
Safety administration announcement(2009.6.30) -Encourage the period of circulation on the basis of refrigeration circulation on Fruit vegetables beverages below 10°C
Require the research development about non-heating production proce
2) 대류 열전달계수(coefficient of convection heat transfer)
매뉴얼에 주어진 h값의 표를 보간하여 이번 실험에서 사용할 대류 열전달계수(coefficient of convection heat transfer) h를 구하도록 하겠다. steady state에서의 온도는 다음과 같이 주어진다.
22.63°
41.3°
26.9°
위의 값들을 이용하여 매뉴얼에 주어진 표
General Education
There are a number of primary and high schools in the local area, many of which are educating the children of our staff. These schools are inadequately funded and require ongoing support.
Many of the children are orphaned and are inadequately cared for in terms of food and clothing; or are from very poor homes that cannot afford to pay school fees. The projects with which we h
1. Introduction
1) Definition of preservation and food-spoilage micro-organisms
Food preservation is the process of treating and handling food to stop or greatly slow down spoilage (loss of quality, edibility or nutritive value) caused or accelerated by micro-organisms. Some methods, however, use benign bacteria, yeasts or fungi to add specific qualities and to preserve food (e.g., cheese, wine
1.실험목적
온도 측정 실험에서는 고체면의 열전달률(heat transfer rate)를 촉진시키기 위해 사용되는 방법 중의 하나인 fin을 사용한 열전달량을 살펴봄으로써 열전달 이론에 대한 실제적인 이해와 적용을 할 수 있도록 한다. 이를 위해 구리 fin과 온도에 따라 색상이 변하는 액정(TLC : Thermochromic Liquid Cry
heat sinks for the LCD TV by adequate natural convection flows, some numerical investigations have been performed. Heat generation rate of the LED panel, temperature distributions of heat sinks and of the surrounding air were properly assumed for the numerical heat transfer analysis.
As the results, surface area, the heat transfer coefficient, the heat performance, and optimum fin spacing of th
비중이 0.6(20°/4°)로 표시된 것은 4℃의 물의 밀도를 기준으로 하여 측정물질의 밀도를 20℃에서 잰 것의 비가 0.6이라는 뜻이다.
2) 부피유속(volumetric flow rate)
부피유속은 부피/시간으로 표시하며 부피는 이 쓰이며 시간은 day, 시간, 분, 초로 표시한다. 질량은 g, kg, ton, lb가 사용되는 데 1lt=2200lb이나
To prevent silicon from agglomerating
→ should cool the solid quickly
Rapid cooling
→ large thermal gradient in crystal
Postulate K=20W/m K
Diameter of wafer: 10-20 cm
L (latent heat of fusion) = 340 cal/g
Temperature gradient in silicon CZ (dT/dx) : 100°C/cm